CDS-EasyIP
System for transmission of video and audio from IP cameras.
Key features of the module CDS-EasyIP:
•
Easy configuration by the switches, no need to connect a computer
•
Power output 48V / 15.4W for IP Camera PoE
•
CDS-EasyIP can work both as a receiver and transmitter
•
Ensures continuous and stable transmission capacity
•
Operates in bridge mode - transmits all data transparently, regardless of
•
IP cameras and recorders.
•
Working on Point-to-Point and Point-to-Multipoint modes receiving the signal from
the 4transmitters.
•
Output power of 27dBm at 5GHz band operation
•
Built-in dual antenna MIMO 2 x 5 GHz 14 dBi (range LoS 2,5km)
•
Outer casing IP65
•
Operating temperature from -20 ° C to +55 ° C
Contents of the package
•
CDS-Easy IP x 1 pc.
•
PoE power supply 48V 0.5A with cable 230V x1szt.
•
Clamps for mounting x 2 pcs
•
Manual and Declaration of conformity
Description of connectors and LEDs
RESET
- reset button to get back to the default settings of the radio module
PORT 2
- LAN port used simultaneously to power IP camera (PoE 48V) or AC adapter connection
PORT 1
- LAN port to connect to the DVR or connect the power adapter PoE48V. This port can also
be used to connect a second IP camera through the LAN in the power supply.
SETTINGS
– switches used to configure the device
LINK
– LED indicating the connection:
red
- the signal is too strong (overdrive), or device is starting;
orange
- a link with a high signal level (very good signal);
green
- a valid link with the correct signal
level; off - the device is out of range or is incorrectly configured. More information about the level of
radio signals can be obtained by logging on to the panel's website.
POWER
–
red
LED for power status
