HSEUiREG07201(R2) MANUAL
Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany
P.13/15 (03/2017.02.2)
Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77
www.camtec-gmbh.com
-
info@camtec-gmbh.com
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
Mechanics & Installation Instruction of the HSEUiREG
Stable metal/aluminium housing IP20. To allow adequate convection, a free air space of 50mm (top/bottom)
and 10mm (sidewalls) is required; and for active devices 15mm space from the sidewalls. For proper air
convection it is necessary to install the HSEUiREG. One can use the DIN-Rail installation (equiped standard)
with our patented 35mm DIN-Rail bracket according to EN60715. It is easy to mount/dismount while snaping it
onto the 35mm DIN-Rail - no tools necessary. A wallmount back plate (option) is availble, too.
It is not allowed to install the HSEUiREG in other mounting direction then as shown in the drawings.
Back Plate Option / DIN-Rail Standard
(The HSEUiREG is always delivered for DIN-rail mount, the back-plate is an optional part that shall be mounted from the
customer. The threads from the DIN-rail mounting brackets shall be used. All screws are included into the Back-Plate Kit.)
