MAINTENANCE PROCEDURES
vmo2008-011-042_b
LH SIDE OF ENGINE
1. Coolant drain plug
4. Drain completely and retighten the
drain plug.
5. Loosen gear clamp from radiator
outlet hose.
6. Remove outlet hose from radiator
to drain the system completely.
vmo2008-011-086_a
1. Gear clamp
2. Outlet hose
3. Radiator
7. Reinstall hose and secure with gear
clamp.
8. Wipe off any coolant spillage on
frame and engine.
9. Refill coolant tank with 1.8 L of
recommended coolant. Refer to
SPECIFICATIONS
for more details.
10. Run engine at idle with the coolant
tank cap off. Slowly add additional
coolant if necessary,
do not over-
fill
.
With vehicle on a level surface, liquid
is at a proper level when seen through
reservoir cap hole.
vmo2008-011-087_a
COOLANT RESERVOIR
1. Coolant here
Liquid can also be validated using
reservoir level marks (small ribs).
vmo2008-011-107_a
COOLANT RESERVOIR
1. Level marks
11. At this point, wait until engine
reaches normal operating tempera-
ture. Depress the throttle lever two
or three times; then add coolant if
necessary.
12. Install coolant tank cap. Inspect all
connections for leaks.
96
______________
Summary of Contents for DS 450 EFI X mx
