16
CAN Srl
–
CU 7000
–
ENGLISH
–
Rev 1/2018
To conclude the installation, the qualified technician is asked to provide all
clarifications and instructions to the end user on correct use of the appliance.
If the appliance is not working correctly after all the controls made, contact the
authorised local dealer.
PROBLEMS
POSSIBLE SOLUTIONS
The flow of gas
appears irregular
Check the gas tap is completely open
Check the power supply mains of the fuel
has an adequate flow rate.
Check the gas rings and the relevant caps
are positioned correctly and are free of
obstructions.
Check the nozzles are suitable for the type
of gas used.
Check compatibility and correct calibration
of the pressure regulator if present.
Check the gas supply tube (tube
obstructed,
tube
bent/crushed,
tube
excessively long, unsuitable tube, etc...).