7 Commissioning
7 Commissioning
WARNING!
Risk of burns
Loosening or making electrical connections during operation is prohibited!
In case of non-observance, there is a risk of electric arcs which can lead to
burns.
→ Disconnect the module from the power supply.
CAUTION!
Uncontrolled processes
Material
damage
and
personal
injury
due
to
incorrectly
performed
commissioning phases (e.g. initial commissioning, recommissioning and in
the event of changes to the configuration).
Always carry out commissioning in this order:
1. insert module
2. have the system checked and approved by a qualified person
3. commission
ATTENTION
Dysfunctions in the living area
The devices of EMC class A can cause disturbances in the living area.
→ The operator must take appropriate measures.
7.1 Delivery state of the modules
NOTE
New devices are preconfigured at the factory.
In the delivery state, the device is in autobauding mode. This means that the
DATAEAGLE searches for the correct CAN baud rate after switching on.
ATTENTION
The search process can lead to CAN errors, which should be considered in
the application. If an error-free switch-on process is required, please set a fixed
baud rate!
Manual
DATAEAGLE 6000 Series - Wireless CAN
37
Summary of Contents for DATAEAGLE 6000 Series
Page 2: ...Manual DATAEAGLE 6000 Series Wireless CAN 2...
Page 61: ......
