Controllers Area Networks Inc.
Smart Tweezers User Manual Version 1.0
Page 12 of 16
Test Frequency Setting
For automatic measurement use
AUTO
setting (default). Use fixed test frequency
for specific measurements, such as very small or very large capacitance (less than
50pf or more than 100uF) or inductance.
c
*
0.1 kHz
10. kHz
1.0 kHz
AUTO
Figure 14.
To fix test frequency set “Smart Tweezers” as shown in Fig. 14.
MAIN
MEASURE
FREQ
AUTO
10KHz
1KHz
0.1KHz
EXIT
Measuring Voltage
Use AUTO mode (default) to measure DC Voltage from 100uV to 800mV (up to 8V
with slide switch manual setting). To measure voltages configure “Smart
Tweezers” as shown in Fig. 15.
c
*
BATTERY
TRACE
CALIBR
AUTO
Figure 15.
MAIN
MEASURE
VOLTAGE
AUTO
TRACE
CALIBR
BATTERY
EXIT
