Controllers Area Networks Inc.
Smart Tweezers User Manual Version 1.0
Page 13 of 16
Use AUTO mode (default) to measure DC Voltage from 100uV to 800mV.
564.11mV
Figure 16.
Use
TRACE
mode if you want to see the oscilloscope like picture of Voltage (Fig.
17).
To change speed turn jog dial button LEFT or RIGHT. To EXIT press the job dial
button.
O
+5
-5
Figure 17.
Adjusting Voltage Offset
To adjust voltage offset:
1. Connect the probes to each other and choose
CALIBER
mode.
2. Press
EXIT
to exit calibration mode.
3. Disconnect probes.
Use BATTERY mode to measure current battery voltage. Press the jog dial button
to exit.
4.32 V
Figure 18.
