Controllers Area Networks Inc.
Smart Tweezers User Manual Version 1.0
Page 2 of 16
Notice
The contents of this document is believed to be accurate, but is not guaranteed by
Controller Area Networks. The information contained within may be changed at any
time and Controller Area Networks and its distributors do not assume any
responsibility for omissions or errors in this document.
Safety Information
Warnings
•
Inspect the Smart Tweezers case before using. Look for cracks and any
damage. Pay close attention to the insulation around the tips. Inspect test
leads for damaged insulation and exposed metal. Do not use the device if it
appears to be damaged.
•
Do not use the device if it operates abnormally.
•
Do not attempt to measure any components in-circuit when your circuit is
under the power.
Cautions
To avoid possible damage to Smart Tweezers or to the equipment under test,
follow these guidelines:
•
Disconnect circuit power and discharge all high-voltage capacitors before
testing resistance, inductance, or capacitance.
•
Do not measure voltages more than 800 mV when in automatic mode.
•
Use proper terminals and functions for your measurements.
•
Use the correct batteries to power Smart Tweezers.
Distributors:
USA: Excelta Corporation,
www.excelta.com
Mexico: Excelta Corporation,
www.excelta.com
Canada: Controllers Area Network Inc.,
sales@smarttweezers.com
Europe: Norrkonsult,
nohlert@compaqnet.se
India: Polymatix Instrumentation Pvt. Ltd.
pipl@bir.vsnl.in
For further information please contact us at
www.smarttweezers.com
.
