1066 Pro
9
✓
Power on the miner and plug in the network cable connected to the switch (or router).
Check whether the link light of the network port is flashing. If the light of the network
port is off, it means that the MM control panel is out of power. Then It is necessary to
check whether the power cable is connected, replace the power supply or check whether
there is a short circuit of the power output.
✓
If the mesh light is on, but the LED light on the MM control panel is off, then the MM
control panel needs to be replaced.
✓
If the LED on MM board is on but the fan doesn’t work, please check the fan cable or
replace the fan.
Cannot Mine
Failures
The mining pool cannot be connected for a long time (more than 5 minutes) after
booting up (the miner lights up yellow for a long time, does not turn green, and has
no hash rate).
The mining pool can be connected after the machine is turned on (the mining
machine LED is green), but it has no computing power.
Possible root cause
Mine pool configuration error;
Network configuration error;
The miner cannot access the external network;
No main output for the power supply of the miner (wiring error, overload, short
circuit or damage);
Miner hash board is not working;
Miner overheating protection.
Trouble shooting guide
✓
If you cannot use the PC to connect to the miner through the network, you can try
to reset the factory settings after confirming that the network environment is
normal, the network cable is firmly connected, and the miner is turned on normally.
For the method of resettting factory settings, see Appendix 1.
✓
Check the current version of the miner's firmware. It is recommended to use FMS to
update to the latest version. For the upgrade method, see Appendix III
✓
Check the status of the hash board
✓
Click Overview to check the working status shown as ②
in the figure below.
Normally, it should be In Work. If OverHot indicates overheating shutdown, you
need to check the fan and ambient temperature as follows.
✓
Check the number of Hash Boards shown as ③ in the figure below. The value
