1066 Pro
15
At the end of the update, there is a notification of “All upgrades were successful” to indicate
the updating success. Otherwise All the IP addresses of the failed upgrades will be listed. For
the miners whose upgrade fails, they can be selected according to IP and then restarted by
clicking the
button. After waiting for 3 minutes, they can try again to upgrade these
miners.
Appendix IV Parameters in Log
字段
名称
备注
Elapsed
Total running time of miner after
startup (unit: seconds)
Ver
Firmware revision
DNA
Unique ID
NETFAIL
The time to disconnect from the
mining pool and the time to restore
the connection after successful
connection to the mining pool.
The odd term (items 1, 3, and 5)
is the time of disconnection from
the pool, and the even term
(items 2, 4, and 6) is the time of
recovery from the pool.
SYSTEMSTATU
Current status of the system.
Including the working status and the
quantity of working hashboards.
DH
Average fault rate. The normal value is
between 0.6% to 1.6%.
Temp
Ambient temperature
TMax
Maximum temperature of Chip
TAvg
Average temperature of Chip
Fan1
Speed of Fan 1
Fan2
Speed of Fan 2
FanR
Percentage of Fan speed
Vo
Average voltage of Chip
PS
Power status
See Chapter 8
PLL0
The chip quantity in every frequency
for the 0
th
hash board.
e.g. PLL0 [256 589 1259 5786]
means there is 256 chips running
