EN-Rev IM/GN-AM-EN/A9 Copyright © October 2017. Canadian Solar Inc.
4 |
Table A
CS6X-P and CS6X-M
Use four clamps on the long side. Mounting rails
run perpendicularly to the long side frame.
A1 range = (340 – 550) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 2400 Pa
A1
A1
A1
A1
A1 range = (410 – 490) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 5400 Pa
Use four clamps on the short side. Mounting rails
run parallel to the long side frame.
A2 range = (200 – 250) mm
Maximum Load:
Uplift load ≤ 1800 Pa
Downforce load ≤ 2400 Pa
Use four clamps on the short side and two clamps
on the long side. An additional support bar should
be placed below the center of the module.
A2
A2
A2
A2
A2
A2
A2
A2
A2 range = (200 – 250) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 5400 Pa
Use four clamps on the long side. Mounting rails
run parallel to the long side frame.
A1
A1
A1
A1
A1 range = (410 – 490) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 5400 Pa
Min. 15 mm
overlap width
Clamp
Rail
Module frame
