www.canadiansolar.com
| 5
CS3k-p, CS3k-MS, CS6k-p, CS6k-M, CS6k-MS
Use four clamps on the long side. Mounting rails
run perpendicularly to the long side frame.
Use four clamps on the short side. Mounting rails
run parallel to the long side frame.
A1 range = (0 – 239) mm
Maximum Load:
Uplift load 2000 Pa
≤
Downforce load 2000 Pa
≤
A2 range = (200 – 250) mm
Maximum Load:
Uplift load 2000 Pa
≤
Downforce load 2000 Pa
≤
A1 range = (331 – 550) mm
Maximum Load:
Uplift load 2400 Pa
≤
Downforce load 2400 Pa
≤
A1
A1
A1
A1
A1 range = (240 – 330) mm
Maximum Load:
Uplift load 3600 Pa
≤
Downforce load 5400 Pa
≤
A2
A2
A2
A2
A1
A1
A1
A1
Use four clamps on the long side. Mounting rails
run parallel to the long side frame.
A1 range = (410 – 490) mm
Maximum Load:
Uplift load 2400 Pa
≤
Downforce load 5400 Pa
≤
A2
A2
A2
A2
Use four clamps on the short side and two clamps
on the long side. An additional support bar should
be placed below the center of the module.
A2 range = (200 – 250) mm
Maximum Load:
Uplift load 2400 Pa
≤
Downforce load 5400 Pa
≤
