background image

T H U N D E R   B A Y   S E

Delivery Options

Collection

Buyer collects hot tub using own transport from one of our 

warehouses. Please arrange 48 hours prior to collection, 

Monday - Friday 10 am - 4pm.

Kerbside

Delivery to outside the kerbside of house, customer to be 

present to sign for the delivery. Customer responsible to 

position the spa after it is removed from truck.

Back Garden

Delivery from warehouse and delivered to customer and moved 

into hot tub location. Customer to provide access for position.  

Check measurements required for each spa.

Back Garden & Demonstration

Delivery from warehouse to customer, moved into hot tub 

location then fully installed (including all accessories) and 

commissioned (No Electrics). Followed by a maintenance 

tutorial. Customer to provide access for position. 

Check your measurement guidelines for each spa. Optional 

crane service is available, please contact us for more 

information.

Cancellation Policy

We require a 48-hour cancellation notice in writing or email 

prior to your scheduled delivery. If we are notified later, then a 

reasonable cancellation charge will be applied.

Service and Warranty Procedures

Please read through your warranty carefully, as some items are 

deemed user serviceable and considered general maintenance 

items by the manufacturer.

If you encounter any problems with your spa please contact 

our service desk on 

service@canadianspacompany.com

Our goal is to resolve any potential issue(s) as quickly as 

possible so that you can continue to enjoy your new spa. 

A complete copy of our Manufacturer Warranty and Owner’s 

Manual can be found on www.canadianspacompany.com

Pre-Delivery Information

Back Garden Placement & Demo Service

Kerbside Drop Off 

Arrange a convenient time to deliver

BACK GARDEN 
DELIVERY FORM

Take your smart phone and tape measure outside with you and 

attach information directly from your phone! At your convenience 

upload your information to our site and our experienced delivery 

team will organise your delivery and installation. 

(3)

Summary of Contents for KH-10030

























Reviews: