CJF_AC_EC_Series_JULY 2021
Page 1 of 6
www.CANARM.COM
Canarm Ltd. - Corporate Head Office
2157 Parkedale Avenue, PO Box 367 Brockville, Ontario Canada K6V 5V6
Tel: (613) 342-5424 Fax: (613) 342-8437
hvacsales@canarm.ca
www
.canarm.com
CJF – AC/EC SERIES
CANARM JET FAN
INSTALLATION AND MAINTENANCE INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Inspect all shipments carefully for damage. The purpose of this manual is to aid in the proper installation and
operation of the Canarm Jet Fan (CJF). These instructions are intended to supplement good general practices
and are not intended to overwrite local codes and ordinances.
IT IS THE RESPONSIBILITY OF THE PURCHASER TO ENSURE THAT THE INSTALLATION AND
MAINTENANCE OF THIS EQUIPMENT IS HANDLED BY QUALIFIED PERSONNEL.
Inspect all shipments carefully for damage.
THE RECEIVER MUST NOTE ANY DAMAGE ON THE CARRIER’S
BILL OF LADING AND FILE A CLAIM IMMEDIATELY WITH THE FREIGHT COMPANY.
GENERAL SAFETY
1.
The CJF units come prepared with motor electrical leads
extended in a liquid tight conduit & a side mounted box.
Motor leads will be marked. Wiring diagram provided.
2.
All electrical work must be done in accordance with all
applicable electrical codes by a qualified electrician.
3.
Do not install or operate this fan in an environment where combustible materials, gases, fumes, or heavy
moisture are present.
4. Caution:
The unit contains rotating parts, electrical components and is heavy and ceiling mounted. Use
appropriate caution when installing and servicing it.
5.
Before starting the unit, carefully remove the inlet guard, and ensure all parts are secure and that the wheel
rotates freely.
6.
Check and tighten, where necessary all screws, nuts, bolts, etc. prior to starting the unit. (As some may
have loosened during shipping)
7. NOTE:
Check and tighten all hardware after 2 days of initial operation.
8.
Make sure there is no foreign debris in the fan compartment or lodged in the wheel itself.
9.
Inspect electrical components prior to completing electrical connections. Make sure everything is tight and
free of damage that may have occurred during shipping.
10.
Always wear appropriate safety equipment when installing or servicing the unit.
11.
Please follow all applicable national, state/provincial and local codes. They will supersede this manual.
12.
Failure to follow the safety instructions in this manual may cause serious injury or death due to electrical
shock, high speed rotating parts or falling weight.
