background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

     

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

   

   

 

 

 

 

 

   

   

 

 

 

 

       

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

   

 

Pg.

 

#8

 

 

 

 

 

Pg.

 

#5

2

2

.

.

NOTE

:  Once ground wires are connected, carefully tuck all wires and marrettes

             into the metal outlet box making sure that the wires are clear of the

             hemisphere and downrod when positioned in mounting bracket.

ELECTRICAL HOOK-UP

Make the following wire connections to the receiver unit (see fig. 3) using the

wire nuts supplied.

-

-

-
-

-

In Quebec, the installation of this product must

be carried out by a qualified electrician.

Fig.3

Connect GREEN fan wire to BARE Copper wire or GREEN housheld

Connect BLACK fan wire to BLACK household supply wire.

Connect WHITE fan wire to WHITE household supply wire.

After making the wire connections, ensure the wires should be spread

apart with the grounded conductor and the equipment-grounding

conductor on one side of the outlet box and the ungrounded conductor

on the other side of the outlet box.

Ensure the splices after being made should be turned upward and

pushed carefully up into the outlet box.

supply wire.

120V AC

SUPPLY

BLACK

WHITE

OUTLET BOX

GROUND

GREEN

TO MOTOR L

AC IN L

BLACK wire

BLACK

BLACK

WHITE

BLACK

(from main power)

BLACK wire

(from ceiling outlet box)

TROUBLESHOOTING

TROUBLE

SUGGESTIONS

- Check fuses and circuit breakers.

1.  Fan will not start      - Check wiring connections to fan.

- Check wiring connections in switch housing.

CAUTION:  Turn power off for last two items.

2.  Fan sounds noisy      - Check to make sure that all screws in motor housing are snug.

- Check to make sure that blade bracket screws are tight.
- Allow  a 24 hour break in period to eliminate most noises. 

3.  Fan wobbles            - Check that all blades are screwed firmly into blade brackets.

or shakes

excessively.

- Check that blade brackets are secured firmly to motor.

- Check distance from tip of blades to ceiling. 

- Check distance between blade tip to blade tip. All 

measurements should be equal.  Loosen blade 

screws and position blade until even then re-tighten.

- Check to make sure that jam screws in downrod are tightened.

- Make sure canopy and mounting bracket are 

tightened securely to wooden joist.

Reviews: