pg. 6
An additional safety support is provided to
prevent the fan from falling. Secure the
safety cable to the ceiling joist with screw
and washer (not included), as illustrated in
Figure 9.
Remember to disconnect the power.
Follow the steps below to connect the fan
to your household wiring. Use the wire
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
Make sure there are no loose strands or
connections.
Step 1 Connect the fan supply (black) wire
and light supply (black) wire to the black
household supply wire as shown in Figure
10.
Step 2. Connect the neutral fan (white) wire
to the white neutral household wire.
Step 3 Connect the fan ground wire (green)
to the household ground wire.
Step 4 After connecting the wires, spread
them apart so that the green and white
wires are on one side of the outlet box and
the black and the blue wires are on the
other side.
Step 5 Turn the connecting nuts upward
and push the wiring into the outlet box.
Figures 11 and 12 illustrate the wiring
connections for optional wall control (The
wire color out of wall control may vary, see
wall control's installation manual for correct
wire connections.)
Figure 9
Figure 10
Figure 11
Hanger bracket
Safety cable
6. INSTALLATION OF SAFETY SUPPORT
7. MAKE THE ELECTRIC CONNECTIONS
BLK
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
POWER LINES 120V
WH
BLUE
BLK
WH
FAN
LIGHT
BLK
BLK
WH
WH
LIGHT
SWITCH
GREEN GROUND
WH
BLUE
BLK
WH
GRN
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
BLK
BLK
WH
WH
FAN
LIGHT
POWER LINES 120V
BLK
GREEN GROUND
Summary of Contents for PALISADE
Page 13: ......
