Section 4 - MultiLogger Configuration
38
MLGPS-P
User's Guide
4.3.1 Base Station Configuration
Several steps are required for the initial configuration of a Base Station:
▪
Set the
Station Type
to
Base
▪
Configure
Offline Mode
(if compatible)
▪
Configure a
solution
for the Base Station data (optional)
▪
Enter the
coordinate system
and
antenna type
(optional)
▪
Enter the station's
Initial Position
if known, or determine through the
Averaging function
▪
Start
data collection
Note
‒ Clicking Start before setting the base station’s Current Position from the drop-down menu will result in the loss of
the averaged position value, meaning the Average procedure must be repeated.
These steps are completed in the
Settings
and
Advanced Settings
tabs of the
Logger form
:
(Figure 4.3.1 A ‒ The Logger form opened to the Settings tab, with a Base Station configured)
