Appendix C - Configuring Offline Only Stations
86
MLGPS-P
User's Guide
Appendix C - Configuring Offline Only Stations
In the event a station has no available network configuration; additional steps are needed during initial
configuration.
C.1 Configuring Communications for Offline Only Stations
If configuring an MLGPS station that will run entirely offline, it can be configured using a COM rather than the
TCP/IP Socket.
(Figure C 1)
The Network Manager is updated with the new COM communication type and node. This can be renamed by
selecting the node in the network tree clicking it a second time.
Make sure to select the proper Com Port.
(Figure C 2)
Click the
Add
button on the Network Manager tool bar to open the
Add new Gateway or Device
form.
