Section 4 - MultiLogger Configuration
36
MLGPS-P
User's Guide
4.3 Base and Rover Station Configuration
Differential processing relies on at least one
Base Station
‒ with its exact position determined ‒ as a
reference, and at least one
Rover Station
on the monitored structure.
Multiple Base Stations can be configured as needed. The purpose of using multiple Base Stations is to keep
the baselines between the Rovers and the Base Stations as short as possible, and to mitigate potential errors
due to movement in single Base Stations.
MLGPS supports differential processing with multiple baselines. Each MLGPS unit can be configured as a
Base or Rover Station. Multiple Rovers can be added to each Base Station, with each Rover and Base Station
composing a baseline.
To create a baseline, at least one Static solution must be configured for the Rover.
The
Logger form
is used for configuring the station and running its functions after it has been added to the
network. To open the Logger form, click on the
Logger form icon
in the Network Manager toolbar, shown in
Figure 4.3 A:
(Figure 4.3 A)
