Section 4 ‒ MultiLogger Configuration
MLTDR-W-50S User's Guide
33
4.2 Programming Configuration
There are essentially three configuration steps for the MLTDR-W programming:
1. Define the locations used to store the TDR channel number, status locations and waveforms.
2. Select the Output Data option.
3. Customize the programming to match the cables/configuration used.
Define Locations
Use the
Configure Input Locations
form to define the locations required by the programming. This form is
accessible from the
Input Locs
button on the
Program
tab.
(The Input Locs button on the Program tab of the Logger form)