Section 4 ‒ MultiLogger Configuration
MLTDR-W-50S User's Guide
41
Select the logger node and click on the
Data Collection
tab to configure the data collection settings.
Check
Enable Schedule
and
Automatic Database Import
, to enable scheduled collection of data from the
device and automatic import of the collected data into the selected database. Configure the
Interval
for
collection and check
Resume Schedule After Delayed Retries
, to continue that data collection even if a
previously scheduled collection failed.
(The Data Collection tab for the MLTDR-W's datalogger in the MultiLogger Network Manager)
Press
Save
once all settings are configured. MultiLogger can be closed and the data collection will be
performed autonomously. You can view collection status at any time by clicking the
Data Collection Status
tab of the Network Manager.
