30
31
CAUTION
RISK OF FLOOD
Disassembly while under pressure can
result in flooding.
RESIN CLEANER
An approved resin cleaner MUST be used on a monthly basis if your water supply contains iron. The amount of resin cleaner and frequency of use is
determined by the quantity of iron in your water. Consult your dealer and follow the directions on the resin cleaner package.
Item #
Description
45147
ResCare - 1 gal. (128 oz) Bottle
80030022
ResCare - 64 oz Bottle (Easy Feeder Refill)
Item #
Description
45127
Rust Out - 5 lb. Bottle
45128
Rust Out - 50 lb Pail (USA only)
Item #
Description
55030005
Easy Feeder - 0.5 oz/day Feeder
55030006
Easy Feeder - 1.0 oz/day Feeder
55030007
Easy Feeder Starter Kit ½ oz with 64 oz ResCare
SERVICING YOUR CONTROL VALVE
BEFORE SERVICING, YOU WILL NEED TO:
1.
Shut the water supply to the conditioner OFF, put the conditioner into the BYPASS position.
2.
Relieve water pressure in the conditioner by stepping the control into the backwash momentarily.
3.
Return the control to the SERVICE position.
4.
Unplug the electrical cord.
5.
Disconnect the drain line connection.
Always follow these steps prior to servicing the valve.
WARNING
RISK OF SHOCK
Unplug the unit before removing the cover or
accessing any internal control parts.
RESCARE® EASY FEEDER INSTALLATION INSTRUCTIONS SQUARE BRINE TANK - CONTINUED
5.
Take off the small hole cover on
the brine well lid.
6.
Take off the cover of the ResCare bottle.
Insert the wick, making sure it touches the
bottom of the bottle. Insert the other end of
the tube completely into the hole in the brine
well cap. Automatic feeding will start in a few
hours.
Summary of Contents for 185HTO
Page 2: ......
