8
9
1.
Control Valve
2.
Pressure Tank
Model 300 will get
an Adaptor and the
O-ring shown
Note: Tanks come
preloaded with media
with the exception of
some larger systems
where the media will
come in containers.
This is due to weight
restrictions. Media will
need to be loaded
on site. See steps to
properly load media
contained in this
manual.
,03257$17
3/($6((1685(7+($77$&+('
78%(67,))(1(5,6,16(57('
,1727+(%5,1(/,1(%()25(
7,*+7(1,1*
7+(187
There are 8 Red clips. Please
check to make sure you
have all of them.
3.
Parts Box
60090003
2X 1” Straight
Adapter
60010006
Bypass Tool
60010026
O-Rings Attached
60090010
2 X 3/4”
Elbow
Adapter
60090026
Elbow, Inlet/Outlet, 1” NPT
Optional with some units
60010052
Transformer
92360
Grease
Packet
Brine Tank
(Round or
Square)
Brine Tank
Tubing
Brine Well/
Safety Float
Brine Tank Lid
Grid (Round or Square)
Grid Legs (3 for
Round and 4 for
Square)
4.
Brine Tank Assembly (Round Brine Tank Shown))
,03257$17
3/($6((1685(7+($77$&+('
78%(67,))(1(5,6,16(57('
,1727+(%5,1(/,1(%()25(
7,*+7(1,1*
7+(187
Note: For upflow water softeners, a problem water injector
kit is enclosed. See Problem Water Injector Kit page for
usage information.
UNPACKING/INSPECTION
WARNING
RISK OF CHOKING
Discard all leftover parts and packaging materials after
installation. Small parts could be a choking hazard.
NOTE
Canature is NOT responsible for
damages in transit.
NOTE
Due to transportation and climatic conditions, all
connections, including the valve to the tank, need to
be checked at time of installation and hand
tightened, where necessary.
Be sure to check the entire unit for any shipping damage or parts loss. Also note damage to the shipping cartons. Contact the transportation
company for all damage and loss claims.
The manufacturer is not responsible for damages in transit
.
Small parts, needed to install the softener, are in a parts box. To avoid loss of the small parts, keep them in the parts bag until you are ready to
use them.
What is included in the box?
For Models 075,100,150, 200, 300 you will expect the following:
1.
Control Valve*
2.
Pressure Tank
3.
Parts Box
4.
Brine Tank Assembly
5.
Drain Hose & Clamp (Not included in some brands)
6.
Owners Manual
*All units (75, 100, 150, 200) are pre assembled with control
valve installed on the tank, no assembly required.
Summary of Contents for 85HE
Page 2: ......
