Positioning
the
Aimer
to
V
ehicle
POSITIONING THE AIMER TO VEHICLE
25-35 cm
10-14 in
Fig. 20
Top View
Side view
Note: There are several ways to determine the center of the headlight beam. If your
headlight has a clear lens and you can see the bulb, it is generally located at the center.
Some headlight lenses have a small dot in the lens that indicates the center. Many light
beams have a “dark spot” in the center of the beam, this can be easily found by placing a
cloth over the light and turning on the headlights.
Rotate aimer positioning system (pointer) to front of aimer.
Move aimer so that
positioning pointer is at center of headlight beam. The pointer can be stored as shown
with dashed lines in illustration, when not in use.
Canbuilt
Lift Here
Professional Optical
Headlight Aiming System
Align with center of beam
Align with center of beam
Place the aimer in front of one
headlamp at a distance between 10
to 14 in. (25 to 35 cm). M o s t b e a m
patterns are clearest if the optical
lens is about 12” from the lamp
surface.
OPTIONAL METHOD OF POSITIONING AIMER
The
has markings drawn on the aimer which can also be used for positioning the
aimer at the center of the headlight. These markings can be used instead of the pointer if
desired. Laser can also be used for vertical centering. See drawings below.
Panther
Page 10 - Positioning Aimer to Vehicle
Canbuilt Mfg.
Perfect Night Vision.....
Summary of Contents for OPT-5405
Page 2: ......
Page 4: ......
Page 28: ......
