Electrical connection
Power supply:
Red cable
= switched positive (12V) – use a 5A fuse (not included)
Black cable
= Ground
CAN-Bus connection:
White cable
= CAN High
Yellow cable
= CAN Low
Connect can high to the can high connection of your ECU and can low to the can low
connection. If the CAN-Bus termination needs to be activated within the display, please go to
the display menu under “settings” and activate “Can term”.
Most of the time there are no other devices in the CAN Bus available so the terminator needs
to be set.
Analogue Inputs:
Orange cable
= 5V output
black cable
= ground out
4x green cable
= analogue inputs 1-4
Encoder
To change settings/views within the display
Press
= Select the particular menu item
Turn left/right= up/down in the menu or change the particular value
Micro-USB connection with update module
For direct connection to your PC/laptop for software updates.
Version v0.2
www.vadpro.com
