27
with respect to evaporative emissions in the following manner when installing certified
components;
Excerpt from CFR 40 1060.135
(a) You must affix a permanent and legible label identifying each engine or piece of equipment before introducing it into U.S. commerce. The label
must be
—
(1)
Attached in one piece so it is not removable without being destroyed or defaced.
(2)
Secured to a part of the engine or equipment needed for normal operation and not normally requiring replacement.
(3)
Durable and readable
for the equipment’s entire life.
(4)
Written in English.
(5)
Readily visible in the final installation. It may be under a hinged door or other readily opened cover. It may not be hidden by any cover attached
with screws or any similar designs. Labels on marine vessels must be visible from the helm.
(c) If you produce equipment without certifying with respect to evaporative emissions, the equipment label specified in paragraph (a) of this section
must
—
(1) State: ‘‘MEETS U.S. EPA EVAP STANDARDS USING CERTIFIED COMPONENTS.’’ (2) Include your corporate name.
Below is an example of a label specified by CFR40 1060.135 for use with certified components;
MEETS U.S. EPA EVAP STANDARDS USING
CERTIFIED COMPONENTS
CORPORATE NAME
Please refer to CFR 40 1060.135 to review EPA vessel labeling
requirements.
The NMMA has a program to supply OEM builders with
labels. Please refer to the NMMA website below for further
information regarding the NMMA label program;
www.nmma.org/certification/products/labelsanddecals.as
px
TWO-YEAR WARRANTY & LIABILITY
Generally:
Attwood Carbon Canister System Deck Fills are
covered by a two (2) year limited warranty from the date of a
Vessel’s first retail sale.
Pre-requisites to Warranty Eligibility:
For the warranty
coverage described herein to apply, the following conditions
must be met:
•
Component must have been properly installed per
Attwood installation instructions; and
•
The
component
cannot have been altered or abused by Boat Company or its
customers.
Warranty Terms for Components:
4
/
1
2-
" dia.
57
mm
rill for (4) #8
D
S
crews
DO NOT USE
ot be to s
cale.
Template may n
Refer to separate template sheet
included in product carton.
