72
73
Operating and navigating
Operating and navigating
Before foiling
• Ensure that you obtain sufficient operating experience of the boat before welcoming any
passengers on board. You are handling an advanced electrical hydrofoil.
• Inform passengers that the boat may land on its side while foiling and that they should use the
handles and seat belts to avoid the risk of falling overboard or getting hurt.
Start foiling
1. Put on the seat belts and tighten them.
2. In the user interface, select Retraction settings and press Foiling mode until the foils are fully
extended.
3. Prepare for takeoff. Make a visual check of the sea ahead. You should have an unobstructed
view of 250m / 820ft.
4. Aim for a straight course and give full throttle. The boat will start foiling at about 17kn.
Optimum foiling speed is 22kn.
Landing
1. Decrease speed. The boat will land at about 17kn.
NOTICE! The foils remain extended until another mode is selected.
Anchoring, mooring, and towing
It is the responsibility of the driver to ensure that the anchoring, mooring, and towing lines meet
the requirements of the boat.
Context
Required force strength
Anchoring forward
27.2 kN
Mooring forward
22.3 kN
Being towed forward
27.2 kN
Aft
19.0 kN
Tensile strength of lines
Maximum 80% of the strongpoint tensile strength.
Cleats and lines
The boat has four extendable cleats: two in the aft and two on the bow.
4x
Summary of Contents for C-8 2023
Page 1: ...CANDELA C 8 Owners Manual...