Candela ELR EDGE-LIT Installation Manual Download

Page: 2 / 4

REV 2022 0929

SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT CANDELA LIGHTING FOR UP TO DATE DETAILS.

CANDELA LIGHTING

• CANDELA.LIGHTING

ELR EDGE-LIT EXIT RECESSED LED

Installation Manual

SAVE THESE INSTRUCTIONS

ELECTRICAL CONNECTIONS

Make the proper connections

For 120-277VAC, connect the black and white wires to the black and white supply wires.

Connect the green ground wire to the ground supply wire.

INSTALLATION INSTRUCTIONS

Turn off AC power.

Remove the front cover from the housing by gently prying it open with a flat head

screwdriver

DIMENSIONS

Ground Wire

White Wire

120-277VAC

Input

Summary of Contents for ELR EDGE-LIT

Page 1: ...t install in areas subject to combustible vapors or gases Verify luminaire location ratings are suitable for installation environment refer to specification sheet as needed Do not restrict luminaire s...

Page 2: ...SAVE THESE INSTRUCTIONS 2 ELECTRICAL CONNECTIONS Make the proper connections A For 120 277VAC connect the black and white wires to the black and white supply wires B Connect the green ground wire to...

Page 3: ...the housing using the provided screws Figure 4 E Feed AC input wires out of the housing into the J Box F Connect the battery connectors together emergency battery models only G Reinstall the front cov...

Page 4: ...chevron is needed leave the chevron on and remove only the film If no chevron is needed remove the chevron and the film together F This unit can be mounted on any flat surface The EXIT panel can be r...