Alexandrite Long Pulse Laser 755nm-GENTAL MAX PRO
2. Safety
This article shows the details of safety when operation. The operator and technician
must be certified after professional training of safety, know well the requirements of safety
and steps to operate the laser.
2.1 Electric safety
1
．
Make sure the voltage of laser requiring will be adapted by local electricity supply.
2. 10 minutes after switching off and plug off the cable, only the maintenance can be
started. No leave the laser without anyone taking care of by power on, or else injure will be
happened to human or laser itself.
3. Ensure that all the operators and their assistants know how to operate the laser
and know well how to switch off laser when emergency.
4. There is high voltage inside the laser, only qualified technicians or workers from
Perfectlaser can repair of maintain the laser.
5. The laser connects earth with a wire of yellow and green color, photo A. Fine earth
connection is very important.
A
(Different regions may have a different style electric plug, above photo only can be
reference.)
2.2 Optical safety
1. Laser headpiece is of high energy output, no look at directly without any
protection.
2. Ensure the operating room is no mirrors or any articles which can function as a
mirror to reflect the laser.
3. Ensure that all the operators and assistants know well the knowledge of optical
safety.
4. Ensure that all the operators and assistants and workers are protected well by
goggles, and the patients are wearing the eye-patch.
5. As the high laser peak power and density, operation error will damage the skin.
6. Laser 1064nm is invisible; the eyes will be blanked forever if wrongly shooing into.
7. Laser 755nm is visible red, and the eyes will be blanked forever if wrongly
5 / 32
