Charging and protection features
To provide optimum power supply the HKC 250 DuoLED A is equipped with a Li-ion battery. It is
rechargeable and maintenance-free and distinguishes itself by low self-discharge.
Charging the battery:
To recharge the battery, use the Charging Cradle HKC 200 LS included in the scope of delivery.
It is supplied with energy either via the plug-in power unit or the car charging adapter, which is
signaled by the green LEDs.
Place the Work Lamp HKC 250 DuoLED A in the charging cradle observing correct polarity.
The charging process is started immediately. If the red LEDs of the Charging Cradle HKC 200 LS
are on, the HKC 250 DuoLED A is being charged. If the green LEDs are on, it is
indicated that the battery is fully charged. The charging time is approx. 9 h.
Protection features:
The HKC 250 DuoLED A is equipped with an overcharge protection for the rechargeable battery,
which means that the lamp may be stored permanently in the charging cradle.
Due to the deep discharge protection the rechargeable battery is always protected against
damaging deep discharge to prolong its service life.
We recommend that you fully charge the battery before using the lamp for the first time in order
to make full use of its efficiency.
Special features
Emergency light function:
If the HKC 250 DuoLED A is in the charging cradle, it switches off automatically due to the
integrated emergency light function in case of power failure. To use this function,
please proceed as follows:
1. Connect the Charging Cradle HKC 200 LS to the power supply (green LEDs are on)
2. Place the HKC 250 DuoLED A in the charging cradle with the correct polarity (depending
on the charging status the red or green LEDs light up)
3. Use the rotary switch to set the desired lighting mode for the emergency light
function (lamp will be off)
Checking the emergency light function:
Disconnect the charging cradle from the power supply to simulate a power
failure. The work lamp now switches on automatically to the selected mode.
Using the lamp as warning light:
The HKC 250 DuoLED A may be used as warning light by selecting the flashing light mode
and inserting the orange diffusing plate (included in the scope of delivery).
GB
14
CANDELUX SA Ihr Spezialist für Leuchten mit Notlichtfunktion.
Besuchen Sie uns unter
www.candelux.ch