For further support please go to www.candeo.io
Notes
Instructions version: 2204.1
Candeo Smartfoss Water Timer - CSF1TZ
•
Smart Life is a 3rd party app provided by Tuya. We have no control or influence over future updates
of that app that may cause these instructions to become out of date. In the event of changes to the
app interface you will be able to access up to date instructions from our website at www.candeo.io
Alexa and Google Assistant
Factory Reset
To use the device with Amazon Alexa, you will need to install Smart Life skill within your Amazon Alexa app.
Once Smart Life has been connected to your Alexa app, you will be able to control the watering device by
saying:
“Alexa, turn on {your chosen device name}”
“Alexa, turn off {your chosen device name}”
To use the device with Google Home you need to connect Smart Life by following the instructions in the
Google Home app. Once Smart Life has been connected to your Google Home, you will be able to control the
watering device by saying:
“Hey Google, turn on {your chosen device name}”
“Hey Google, turn off {your chosen device name}”
If you need delete the device from your Smart Life account, or perform a factory reset:
1. Select the device in the Smart Life app and tap the edit icon in the top right corner.
2. Scroll to the bottom to select “Remove Device”
3. Choose “Disconnect and Wipe Data”.
Anti-freeze function
Press and hold the button of the water timer for 8 seconds until the green light flashes twice to turn on the
antifreeze function. Press and hold the button of the water timer again for 8 seconds until the red light flashes
twice to turn off the antifreeze function.
The default setting for the antifreeze function is off.
Tips: When the antifreeze function is turned on, and the temperature is lower than 5°C, the water timer will
automatically shut down. It will not run again until the temperature is higher than 5°C.
4
