15
To indicate that zones are bypassed, the zone LED for the bypassed zone will
flash slowly.
.
.
The procedures for adding a bypass and removing a bypass are identical.
1
NOTE:
Zones can be also be bypassed by remote programming. When remote pro-
gramming is used, the system can either be armed or disarmed.
.
To remove a bypass:
Enter your PIN, push the key, enter the digit "2", enter the zone
from which the bypass is to be removed, then push the # key.
NOTE:
Disarming your alarm system
REMOVES
all bypasses.
OR
Enter your PIN, push the key, enter the zone from which the
bypass is to be removed, then press the # key.