Operating the Knee Scooter
Assembly Instructions
Step 1: Unpack your Knee Scooter
NOTE: No tools are required
•
Put together the knee scooter on a
flat, stable surface
•
Remove knee scooter parts from box
•
Check all the parts are included
(knee scooter base, knee pad, basket)
Step 2: Secure the Steering Column into a Vertical Position
1. Push the steering column lock to the side (fig. 1 and 2) then move the steering column down over the steering column lock (fig 3).
Release your hold on the steering column lock to secure the steering column (fig 4) in place.
2. Lift up the steering column lock vertically (fig 5) then press down on the steering column lock handle to lock the steering column
in place (fig 6).
The CanDo
®
Knee Scooter is a mobility solution that offers
superior strength and comfort to individuals with an injury
below the knee, and helps them regain their independence.
It helps keep the body in balance with support from both the
scooter and non-injured leg, and evenly distributes weight for
a more comfortable ride. The scooter has a cushioned knee
pad, ensuring no pressure is placed on the injured leg.
Experience effortless turns and smooth, secure stops with
this device’s simple steering capabilities and integrated
brakes. Take control of your journey in complete safety!
• The injured leg should rest in the center of the knee pad
and cover the full length of the knee pad.
• With the injured leg on the knee pad, stand straight and
adjust the knee pad and handlebar height as necessary.
• Start out with small steps, using your non-injured leg to
move yourself forward on the scooter. Focus on keeping
the non-injured leg as close as possible to the knee pad to
maintain your balance.
Basket
Knee Scooter Base
Knee Pad
figure 1
figure 2
figure 3
figure 4
figure 5
figure 6
