C&TT WCS-211, User Manual

19

18

■

Sensor

Emergency remote control

■

Emergency remote control  

• You can use maximum 4 emergency remote controls and each remote control has its own ID CODE

preventing crossed lines or error in system. Also, wireless RF Type is not limited in directions.

Contents Human detection sensor

Fire sensor

OPTION SENSOR

Explanation

• Senses the temperature

change of the infrared
rays and an object
movement with infrared
rays

• movement range is (right

and left) max. 220 degree
and max. 11 meter

• After setting-up, turn and

fix the sensor lenses
towards the exit

• do not place it close to the

thermo objects, hot
objects. It may cause a
trouble

• apply NTC Thermo- objects

and detects fire breakout by
applying analysis with algorism

• Detects rapid temperature

change in case of fire breakout,
reports a warning message by
detecting the fire breakout
temperature

• “human detection sensor” may

work together with the fire
sensor in case of fire breakout
and it may report
housebreaking message as
well.

• Wellbeing call system allows

additional set-up of optional
sensor beside basic detection
sensor.

• Applicable message for

activities “Door has been
detected to be open”

• For additional option

installation, you can install N/O
Type SW, N/C Type SW, etc.

• Most often used optional

device for door open sensor is
Magnetic sensor. It can
temporarily connect in series or
in parallel.  

Contents

Emergency remote 

control 8activities

Phone connection

Actions after connecting

to the phone

Actions while connecting

to the phone

Explanation

• emergency

remote control
works while
“alarm is on or
alarm is off”

• “stop

Wellbeing call
system” –does
not work

• its activities

come first than
other activities

• press the

button of
emergency
remote control 

• Connect to the

registered telephone
number. (max. 9)

- If no one answers the

phone, it connects to the
next telephone number
after 40 seconds, and it
automatically finishes
after repeating this for 3
times. 

- If the line is busy, it

hangs up the phone and
automatically connects
to the next phone.

- If any one receives the

phone and the voice
comes out from the
handset, it stops to
connect to the phone. 

• After calling the

registered number,
“Sending Wellbeing call
voice message” Press *.
The voice message
appears every 4
seconds.

➲

Press * after the
voice message.

- If you hear the same

voice message, press *.

- Press * after the voice

message in case it does
not recognize * if you
press the button while
the voice message is
on. 

• It senses that the phone

is connected when * is
pressed after the voice
message. If there is no *
pressed, it automatically
connects to the next
phone after 40 seconds.

• When “*” is pressed, the

voice message about
emergency remote
control activities
immediately.

- Please help me. This is

an emergency.

• Hang up the phone

automatically after 60
seconds of both
speakerphones being
one line.

• To stay on line, press “*”

before 60 seconds.
Additionally stays on
line for 60 seconds 

• If you want to hang up

before 60 secs, press
“#” button or hang up
the phone.