NOTES
If you do not find it, wait few more seconds or proceed with a new
scan.
STEP 8
·
Exit from the settings of your device.
·
Return to the Rosières E-Picurien App and wait for the App to
detect the appliance.
·
Once the “Wi-Fi Network is active” screen appears, tap on “Next”.
STEP 9
·
Insert the password of your home Wi-Fi network.
·
Select the type of password (WEP or WPA), then tap on “Confirm”.
NOTES
If this is not automatically synchronised by the App, please insert
the name of your home Wi-Fi network in the first box; pay attention
to the difference between lowercase and uppercase.
STEP 10
·
Wait until the end of the data transfer process between the App
and the product, then tap on “Confirm”. “CONNECTED” appears
on the appliance display and then “REMOTE CONTROL ON”.
·
The enrollment process is now finished.
IF THE SET UP IS NOT SUCCESSFUL
It's important to establish a good Wi-Fi signal strength between the
home router and the appliance: low Wi-Fi signal strength would
cause the failure of the final stage of the set up. To assess if this is
the case, start the connection process
again from Step 1; when you get to Step 5, place your device
(smartphone or tablet) next to the router and search for
“WIFIOVEN-xyzk” net generated by the appliance. If this does
not come up as an option, it means that the router cannot see the
appliance. In this case, we highly recommend you to bring the
router near the appliance (if possible) or contact your internet
provider to purchase a compatible “Wi-Fi Range Extender” to
increase the signal strenght.
Remote control mode
·
Tap on the icon ONE-FI.
·
Set the oven on ONE-FI ON (the oven will beep).
·
The WIFI icon will blink.
EN 11
