Warnings:
T
he induction hob must be installed by a
properly qualified person.
W
e have our own
qualified installers.
N
ever try to install the
appliance yourself.
T
he induction hob must not be installed above
refrigerators, freezers, dishwashers or tumble
dryers.
T
he induction hob should be installed so that
optimum radiation of heat is possible.
T
he wall and the area above the hob should
be able to withstand heat.
T
o avoid any damage, the sandwich layer
and adhesive should be heat-resistant.
4.
Connection to power supply
T
he socket should be connected in compliance
with the relevant standard, to a single-pole
circuit breaker.
T
he method of connection is
shown in
F
igure 3.
Schematic diagram of the control panel
4.
C
hildproof lock key
3.
ON
/
OFF
1.
P
ower/
T
imer regulating key
2.Boost
F
igure (3)
3.
F
ix the hob to the worktop using the four
brackets on the base of the hob.
T
he position
of the brackets can be adjusted according to
the thickness of the top.
Diagram of induction hob:
I
f the cable is damaged or needs replacing, this
should be done by an after-sales technician
using the proper tools, so as to avoid any
accidents.
I
f the appliance is being connected directly to
the mains supply, an omnipolar circuit breaker
must be installed with a minimum gap of 3 mm
between the contacts.
T
he installer must ensure that the correct
electrical connection has been made and that
it complies with safety regulations.
T
he cable must not be bent or compressed.
T
he cable must be checked regularly and only
replaced by a properly qualified person.
(1)
(2)
(3)
(4)
(5)
4
C
ontrol panel
A
ir vent
C
eramic plate
A
ir entry
1
4
2 3
1
4
2 3
CIE3637B CIE3640B3 CIE3640X
CIE4630B3 CIE4630B
Summary of Contents for 3 CIE3640X
Page 10: ...10 ...
