Candy 70 COMBI User Manual Download

Page: 31 / 350

the refrigerator operates for a period of
time, the temperature controller will
automatically set the temperature
within limits it opens.

COMBI OPERATION

Appliance connected to power at the first time:

When the appliance is connected to power at the
first time, the display will be lit for 2 seconds before
going normal and the appliance runs with
intelligence function.

Display Control:

When the refrigerator door is closed

and there is no button operation in 3 minutes, the
display light goes off.
When the display light is off, open the refrigerator
door or click any button to light it up.

VERTICAL DISPLAY

(if present)

TEMPERATURE SETTING

: Click the “Fridge” or

“Freezer” button and when it flickers in the symbol,
temperatures can be set. Each time when the button
is clicked, the temperature changes accordingly.
Temperatures cannot be set under functions of fast
cooling, fast freezing, Smart ECO and vacation. Under
temperature setting, if there is no button operation
in 5 seconds, the button stops flickering and the set
temperature comes into effect.

SMART ECO

: Activate the Smart Eco button to set

the temperatures of the fridge in max. energy
efficiency conditions (+4°C for fridge temperature, -
18°C for freezer temperature).

To enter Smart Eco

: Click “option” until it flickers and

then click “OK” to enter this function.

To deactivate Smart Eco:

Click “option” until it goes

to Smart ECO, click “OK” to quit this function and the
light goes off.

FAST COOLING

: Activate Fast Cooling mode to start

an additional pulse for a fast freezing of the fridge
compartment. The function is activated and
confirmed by the switching on of the dedicated LED
icon.

To enter Fast Cooling

: Click “option” until it flickers

in “Fast Cooling” and then click “OK” to enter this
function.

To deactivate Fast Cooling: C

lick “option” until it goes

to “fast cooling” and then click “OK” to deactivate
this function.

FAST FREEZING

: Activate Fast Freezing to rapidly

freeze big quantities of food keeping intact
nutritional food properties. When the light in Fast
Freezing goes off and the freezer temperature goes
back to the value before fast freezing. When Fast
Freezing time is up (26 hours), it deactivates
automatically. When it goes to Vacation, Fast
Freezing stops.

To enter Fast Freezing

: Click “option” until it flickers

in “Fast Freezing” and then click “OK” to enter this
function.

To deactivate Fast Freezing

: Click “option” until it

goes to “fast freezing” and then click “OK” to quit
this function.

VACATION

: In case of long stops, the Vacation

function can be used. This function deactivates the
fridge compartment, while leaving the freezer on.
Ensure that there is no food inside the fridge
compartment before using this function. The
function is activated and confirmed by the switching
on of the dedicated LED icon. The light in Vacation
goes off and the refrigerator temperature goes back
to the value before Vacation.
Vacation quits under functions of Smart ECO and Fast
Cooling.

To enter Vacation:

Click “option” until it flickers in

“Fast Freezing” and then click “OK” to enter this
function.

To deactivate Vacation

: Click “option” until it goes to

“Vacation” and then click “OK” to quit this function.

POWER OFF MEMORY

: Refrigerator can

automatically keep all the setting in case of power off.
When the unit is plugged in again, the refrigerator
will run with the setting before power off.

POWER-ON DELAY

: To prevent harm to the

refrigerator in case of sudden power cut and power
on, the unit does not start immediately if the power
off time is less than 5 minutes.

FREEZER OVER-TEMPERATURE ALARM (only in case
of power on)

: When the freezer temperature is

higher than 10

Cat the first time connected to

power, the symbol light of the freezer chamber goes
on and the number representing temperature
flickers.
Press any button or wait for 5 seconds, flickering
stops and it goes back to the temperature that was
set.

REFRIGERATOR DOOR OPENING ALARM

: When the

refrigerator is open over 3 minutes, the buzzer will
buzz. Close the door or press any button to stop the
alarm, but for the latter, the alarm will go off again
after 3 minutes.

SENSOR FAULT ALARM

: When it shows “E0”, “E1”,

“E2” or other abnormal symbols, it means sensor
faults and the refrigerator needs repair.