EN 6
Holiday function
The Holiday function can be used to reduce the energy consumption of the appliance, when it is not
used regularly. When the function is on, the LED lights will be off (even if the door is open) and the
fridge will work on low power consumption mode, whereas the freezer will keep working normally.
How to use the Holiday function:
•
The function can be activated from control panel by pressing the “mode” key until the
Holiday icon turns on (an acoustic signal confirms the selection), or by selecting the
function from the app. When the function is activated, the Holiday icon is always ON.
•
To exit the Holiday function, turn it off from the app or chose another function from the
control panel.
•
When the Holiday function ends, the icon of the control panel is switched off and the
previously set cooling levels are restored.
Defrosting
When the layer of frost present in the freezer compartment exceeds 3mm, it is recommended to
proceed with the defrosting as it increases energy consumption.
•
Switch off the appliance and disconnect the power cord.
•
Remove the frozen food and temporarily place them in a cool place.
•
Leave the freezer door open and collect the water on the bottom of the product.
•
When defrosting is completed, dry the interior thoroughly.
•
Reconnect the power cord and set the desired values.
•
Wait a moment and reintroduce the frozen foods.
Demo mode
To enter the demo mode, with the display unlocked, keep pressed the MODE key (C) and press the Wi-
Fi key (B) 5 times within 5 seconds. To exit the demo mode, perform the same operation or power off
the refrigerator.
Error Codes
8 °C
–
6 °C
–
4 °C
–
3 °C
–
2 °C LED lights turn on sequentially, it means there has been a
communication error between the main control board and the display board. Please, contact the
technical assistance to help solve the problem
Summary of Contents for CBL3518EVW
Page 1: ......
