40
EN
INSTALLATION
WARNING! The appliance is heavy. Always handle with at least two persons.
Before first use
➢
Remove all packaging materials.
➢
Clean the appliance with water and a mild detergent and dry it with soft
cloth.
➢
Check if power supply, socket and fusing are appropriate to the rating
plate.
➢
Check if the power socket is earthed and no multi-plug or extension is
present.
➢
Check if the power plug is accessible after the appliance has been
positioned.
➢
Refrigerator and freezer temperature are automatically set at 4°C and -
18°C respectively. These are the recommended settings. If desired, you
can change these temperature manually. See Adjust the temperature.
Environmental conditions
➢
This appliance should be installed in a room that is dry and well
ventilated.
➢
Do not install the appliance near other heat-emitting appliances (ovens,
refrigerators) without isolation or exposed to direct sunlight.
➢
If this appliance is situated in a cold environment (such as a shed,
outhouse or garage), the performance will be affected and this may
damage the food.
Install this product in a position where the ambient temperature is not lower or higher
than the operating temperature: in this case the appliance does not work properly.
•
Extended temperate (SN):
‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 10 °C to 32 °C’.
•
Temperate (N):
‘this refrigerating appliance is intended to be used at ambient
temperatu
res ranging from 16 °C to 32 °C’.
•
Subtropical (ST):
‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C’.
•
Tropical (T):
‘this refrigerating appliance is intended to be used at ambient temperatures
rangin
g from 16 °C to 43 °C’.
Levelling the appliance
The appliance should be placed on a flat and solid surface
40. Tilt the appliance slightly backwards.
41. Turn the feet clockwise to raise the refrigerator.
42. Turn the feet counter clockwise to lower the refrigerator.
