8
Disposal
Old appliances still have some surplus value. An environmentally friendly approach will ensure that valuable raw materials
are recycled.
The refrigerants used in your equipment and insulation materials require special handling procedures. Make sure there is
no pipe damage on the back of the equipment before handling.
Up-to-date information on the options for disposing of old equipment and packaging from old equipment can be obtained
from the local municipal office.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Warnings for disposal
※
Refrigerant and cyclopentane foaming material used for the refrigerator are flammable.
Therefore, when the refrigerator is scrapped, it shall be kept away from any fire source and be
recovered by a special recovering company with corresponding qualification other than be
disposed by combustion, so as to prevent damage to the environment or any other harm.
※
When the refrigerator is scrapped, disassemble the doors, and remove gasket of door and
shelves; put the doors and shelves in a proper place, so as to prevent trapping of any child.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright
for 6 hours before plugging it in to avoid damage to the internal components.
1. Remove the hinge cover and upper hinge from
the top right side of the cabinet. Remove the screw hole
cover from the top left side of the cabinet..
2. Remove the refrigerator door from the cabinet. Move
the hinge plug from the top left to the top right side of the
door.
3. Remove the center hinge from the right side cabinet.
Remove the screw hole covers from the left side of the
cabinet.
4. Remove the freezer door from the cabinet. Move the
hinge plug from the top left to the top right side of the door.
5.
Remove the door stop from the lower right side of th
e door, and install the door stop on the lower left side
of the door.
6. Remove the lower hinge from the bottom right side of
the cabinet. Remove both adjustable feet. Remove the
lower hinge pin from the hinge, flip the hinge over and
reinstall the hinge pin on the other side. Install the lower
hinge on the bottom left side of the cabinet. Install both
adjustable feet.
7. Install the freezer
door. Install the center hinge on
the left side of the cabinet. Install the screw hole
covers on the right side of the cabinet.
Summary of Contents for CCG1L314ES
Page 1: ... Revision C ...
