4.3 Setting The Correct Time
4.4 Use Of Touch Control Clock Programmer
EN 08
00:00
select
ATTENTION:
The oven will only operate providing the clock is set.
WARNING : the first operation to carry out after the oven has
been installed or following the interruption of power supply
(this is recognizable the display pulsating and showing
12:00
) is setting the correct time. This is achieved as follows.
•Push the central button 4 times
•Set time with "
-
" "
+
" buttons.
•Release all buttons.
•This function is typically used
with
“cooking time” function.
For example if the dish has to be
cooked for 45 minutes and needs
to be ready by 12:30, simply
select the required function, set
the cooking time to 45 minutes
and the end of cooking time to
12:30.
•At the end of the cooking set
time, the oven will switch off
automatically and an audible
alarm will ring.
•Cooking will start automatically
at 11:45 (12:30 minus 45 mins)
and will continue until the pre-set
end-of-cooking-time, when the
oven will switch itself off
automatically.
WARNING.
If the END of cooking is
selected without setting the
length of cooking time, the
oven will start cooking
immediately and it will stop at
the END of cooking time set.
FUNCTION
HOW TO ACTIVATE IT
HOW TO SWITCH ITOFF
WHAT IT DOES
WHAT IT IS FOR
KEY LOCK
MINUTE
MINDER
COOKING
TIME
END OF
COOKING
•Child Lock function is
activated by touching Set (+)
for a minimum of 5 seconds.
From this moment on all
other function are locked
and
the display will flash STOP
and preset time
intermittently.
•Child Lock function is
deactivated by touching
touchpad Set (+) again for a
minimum of 5 seconds. From
this moment on all functions
are selectable again.
•Push the central button
1 times
•Press the buttons "
-
" "
+
"
to set the required time
•Release all the buttons
•When the set time as elapsed
an audible alarm is activated
(this alarm will stop on its own,
however it can be stopped
immediately by pressing the
button) SELECT.
•Sounds an alarm at the end of
the set time.
•
During the process, the
display shows the remaining
time.
•Allows to use the oven as
alarm clock (could be activated
either with operating the oven
or with out operating the oven)
• Push the central button 2
times
• Press the buttons "-" or "+"to
set the lenght of cooking
required
• Release all buttons
• Set the cooking function with
the oven function selector
•When the time is elapsed the
oven will switch off
automatically.
Should you wish to stop
cooking
earlier either turn the function
selector to 0, or set time to
0:00
(SELECT and "-" "+" buttons)
• It allows to preset the cooking
time required for the recipe
chosen.
• To check how long is left to run
press the SELECT button 2
Times.
• To alter/change the preset time
press SELECT and "-" "+"
buttons.
•
Push any button to stop
the signal. Push the central
button to return to the clock
function
•At the time set, the oven
will switch off. To switch
off manually, turn the oven
f u n c t i o n s e l e c t o r t o
position O.
•Enables you to set the end of
cooking time
•To check the preset time p
ush
the central button 3 times
•To modify the preset time
press buttons "
-
" "
+
"
•
Push the central button 3
times
•Press the buttons "
-
"
"
+
" to set the time at which you
wish the oven to switch off
•Release the buttons
•Set the cooking function with
the oven function selector
