10
Door reverse
Certain sections of this process may require two people to complete it.
Remove the top bar
cover (1) and the
top hinge (2).
Lift the door
upwards to
disengage it from
the lower hinge.
Put the door to one
side and lay it down
gently on a padded
surface.
Swap over the
position of the lower
hinge and the
adjustable leg to
the other side of the
cabinet
.
Place the door on
the lower hinge,
making sure that the
hinge pin is inserted
in the hole at the
bottom of the
product door.
Remove the
blanking handle
screws using
driver. remove the
plates covering the
a flat bladed screw
screws and then
remove the handle.
11
REGULATIONS, STANDARDS, GUIDELINES
This appliance is in accordance with the following EU guidelines:
-2006/95/EC low voltage guidelines.
-2004/108/EC EMC Directive
REQUESTING ASSISTANCE OR SERVICE
If the problem is not due to one of the items listed in Troubleshooting,
Contact the dealer or authorized Service Center.
Correct disposal of this product
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be
mixed with other commercial wastes for disposal
