6
The Appliance may not work properly if it is left for a longer period at a temperature above or below the
indicated range.
IMPORTANT! -
There is a need of good ventilation around the fridge for easy dissipation of heat, high
efficiency of refrigeration and low power consumption. For this purpose, sufficient clear space should
be available around the fridge. It is advisable for there to be 75mm separating the back of the fridge to
the wall, at least 100mm of space at its two sides, height of over 100mm from its top and a clear space
upfront to allow the doors to open 160
°
.
Climate classification
Ambient temperature
SN 10~32°C
N 16~32°C
ST 16~38°C
T 16~43°C
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear
section of appliances, as poor air circulation can affect performance. Built-in appliances should be
positioned away from heat sources such as heaters and direct sunlight.
Description of the appliance
View of the appliance
1.Temperature Regulator
2.Upper Drawer in freezer
3.Lower Drawer in freezer
4.Door
Reversing the door
The side at which the door opens can be changed from the right side (as supplied) to the left side, if the
installation site requires.
Before you start lay the refrigerator on it’s back in order to gain access to the base,you should rest it on
soft foam packaging or similar material to avoid damaging the cooling pipes at the rear of the
refrigerator.
1. Stand the refrigerator, use a flat bladed screw driver to remove the 2 screw covers at the rear of
the refrigerator lid.
1
2
4
3
Summary of Contents for CFU 195/1 E
Page 12: ...CFU 195 1 E RO ...
