7
LAMP HOOD MODEL INSTALLATION
1) Loosen the six 4 x 8 tapping screw
and put down the lower chimney
2) Loosen the eight screw which fixing
on angle bar, and adjust the height of
the need to install, and lock the screw
again.
8 x M5 *12 screws
8 x M5 *12 nut
3)
According to the hole location in
hanging panel to fix the explosion
screw on the ceiling, and put up the
cooker hood and lock it with the
explosion screw on the ceiling
8 x M6*60 screws
IMPORTANT: Make sure all
screws are tightly.
IMPORTANT: This stage of the
installation process MUST be
completed by two people.
Summary of Contents for CIDC 61/1 X
Page 1: ......
Page 33: ... ﺍﻟﻌﺭﺑﻳﺔ ﺍﻟﻠﻐﺔ ﻭﺍﻟﻣﺳﺗﺧﺩﻡ ﺍﻟﺗﺭﻛﻳﺏ ﺩﻟﻳﻝ CIDC 61 1 X ...