12
Setting the timer to turn one cooking zone off
Set one zone
Rotate the corresponding knob control that you want to set
the timer for.
Set the time by touching the time control and then
rotating knob
Hint: Rotate the corresponding knob control of the timer once
time will decrease or increase by 1 minute.
Rotate the corresponding knob, and the “00” will show in the
timer indicator, the timer is cancelled
When the time is set, it will begin to count down
immediately. The display will show the remaining time and
the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
3.3.5
Using the Boost function
Activate the boost function
Rotate the corresponding knob. Make sure the display
shows “P”.
Cancel the Boost function
Contra-rotate the corresponding knob to you want to set
power level.
