damage easy.
Method 2: If instructed to do so, it can be put into a dishwasher, set the
temperature at around 60 degrees.
Charcoal filter replacement:
To fit and to replace the charcoal filter
please remove first the aluminium cassette filters to have access to the
motor (see above picture), then fit the charcoal filter by turning anti-
clockwise as shown on the following picture. Turn clockwise to remove
it.
7.2 Replacing lamps
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
Slide out the light bulb to be replaced and replace with the same model.
7.3 Notice of cleaning cooker hood
A.
To protect the main body from corrosion over a long period of
time, the cooker hood should be cleaned with hot water plus non
corrosive detergent every two months.
B.
Please do not use abrasive detergent for it will damage the body.
C.
Keep the motor and other spare parts free from water, as this will
cause damage to the appliance.
D.
Before cleaning the appliance please remember to cut off power
E.
The carbon filter shouldn’t be exposed to heat.
F.
Please don’t tear open the fixed bar around the carbon filter
G.
If the plug or cord is damaged, please replace it with special soft
cord.
Summary of Contents for CMDG 919 Series
Page 10: ... ...
