Candy CMDN 182 EU User Manual Download

Page: 29 / 120

1.2 Single key operation
1.2.1

‘Temp. Zone’ key

）

This key is to select the temperature zone, and

the temperature zone changes each time the key is
pressed, with the temperature of the selected zone
displayed by digits.
2

）

The temperature zone selection changes through

the following cycle:

Fridge → Freezer →Fridge ;

）

Every time when settings are finished (with no

flickering any more), if the ‘Temp. Zone’ key is
pressed again, ‘Fridge’ starts flickering first.

1.2.2

‘Temp.’ key

）

Under the temperature setting state, if the

temperature zone is selected to be Fridge (with
patterns of both the left and the right fridge doors

flickering at the same time), press the ‘Temp.’key,

then the two digits starts flickering, which takes

effect when the ‘OK’ key is pressed; and if the

temperature zone is selected to be Freezer (with
patterns of both the left and the right freezer doors

flickering at the same time and the ‘

’sign illuminated),

set the freezer temperature by reference to the fridge
temperature setting.
The temperature will rise by 1

℃

with each key

response, which can be set in a cyclic manner.
2) Adjustable temperature range for each
compartment

：

Fridge compartment: 08

～

02;

Freezer compartment: -16

～

-24;

The  default  value  for  each  compartment  when  the
refrigerator is energized for the first time:
Fridge  compartment  temperature  is  05,  and  freezer
compartment temperature -18.
Fridge  OFF:  When  the  fridge  temperature  is  set,  the
temperature setting progresses through the following
cycle.
2

℃

→3

℃

→4

℃

→5

℃

→6

℃

→7

℃

→8

℃

→OF→2

℃

(‘OF’ represents the

OFF state, and when the OF

setting takes effect, the fridge will be shut off, with no
refrigeration request.)

1.2.3

‘Function’ key

The selected functionchanges with each key response.
Function selection changes through the following
cycle:

Pure Tech Light

→ Quick Freezer → Holiday →

Eco

→

Pure Tech Light;

Every time when the function setting is finished, if

the ‘Function’ key is pressed again, ‘Pure Tech Light’

starts flickering first.
When a function has not been set, press this key to
select the function,

and then press the ‘Ok’ key, the

selected function is enabled.
When a function has been enabled, press this key to
select the function, and then press the OK key, the
enabled function gets exited.
1.2.4

‘OK’ key

Under the state of function selection or temperature
setting, the selected function or the set temperature
value comes into force when this key is pressed, with
the corresponding flickering stopped immediately.
Under  the  function  selection  or  the  temperature
setting  state,  if  this  key  is  not  pressed  within  5
seconds,  flickering  gets  stopped,  with  the  selected
function or the set temperature value invalid.
1.2.5

‘Unlock’ key

Under the state of keys being locked, keys can be
unlocked by holding down this key for 3s.

1.3 Key combination operation

1.3.1

Hold down the ‘Unlock’ key, and then press the

‘Function’ key for more than 3S, you can access the

parameter setup program.
1.3.2

Hold down the ‘Unlock’ key, and then press the

‘OK’ key for more than 5S, you can access the

maintenance program.
1.3.3 Hold

down the ‘Unlock’ key, and then press the

‘Temp.’ key for more than 3S, you can access the