18
statement by the distributor
DOOR REVERSIBILITY
Tools needed
: cross screwdriver, putty knife, thin-blade screwdriver, 5/16’’ socket and ratchet,
masking tape
1.
Power off the refrigerator, and remove all objects from the door trays.
2.
Dismantle the screw hole caps, screws and handle, and remove the plastic screw hole caps from
the other side.
3.
Dismantle the upper hinge cover, screws and upper hinge, and remove the hole cover from the
other side. Unplug the wiring connector on the right side of refrigerator top
4.
Dismantle the door and right bottom hinge assembly (hinge shaft, adjustable foot and hinge),
disassemble the right bottom hinge assembly and assemble the hinge shaft and adjustable foot
on the other side of hinge , then assemble the whole hinge assembly on the other side of
refrigerator
5.
Remove the door upper cover, install the upper hinge sleeve to the other side and install the
door upper cover. Dismantle the right door stopper .sleeve pipe from the right bottom of door,
insert the sleeve pipe into hinge hole of left bottom of door, and take out left door stopper from
the accessory bag, and assemble it on left bottom of door, the right door stopper could be
reserved for future use.
