41
HOLIDAY Icon:
In case of long stops, the Holiday function can be used. This function deactivates the
fridge compartment, while leaving the freezer on. Ensure that there is no food inside the fridge
compartment before using this function. The function is activated and confirmed when the icon LED
changes from white to blue.
If you want to exit the Holiday function, you will need to press the Holiday icon again, the light in
Holiday goes off and the refrigerator temperature goes back to the value before Holiday.
WI-FI Icon
:
This appliance is equipped with technology that allows you to control it
remotely via App. Press Wi-Fi icon for 3 seconds to activate Wi-Fi function and the icon light changes
from white to blue.
Machine Enrollment (on App)
: Download the SimplyFi App on your device. The Candy SimplyFi App
is available for devices running both Android and iOS, both for tablets and for smartphones. Get all
the details of the functions by browsing the App in DEMO mode.
Open the App, create the user profile and enroll the appliance following the instructions on the
device display or the "Quick Guide" attached on the machine. This operation is necessary just for
the first installation. To finalize the enrollment following the instruction on the smartphone’s
screen.
Refrigerator usage from remote by App
: When the enrollment is completed, there will be Wi-Fi LED
switched on. From now on it will be possible to manage the product by using the buttons on the
display or using the App: both of them will be aligned according to the last command given.
INTERNAL USER INTERFACE
SET Button
: Press SET button for setting the temperature until you reach the level you want
where level 1 is the warmest and level 4 is the coldest. Under normal operating conditions, we
recommend using an intermediate setting (level 2).
Once the setting takes effect, it immediately enters the corresponding stall for operation control,
and the stall indicator lights up 3s3min and then goes out. Factory default temperature is set to 2.
Long press "SET" key to exceed 3s and enter the hardware self-check program. The hardware self-
check operation is effective within 10min, and the long button operation after 10min is invalid.
WI-FI Button
:
This appliance is equipped with technology that allows you to control it
remotely via App. Press Wi-Fi icon for 3 seconds to activate Wi-Fi function and the icon light changes
from white to blue.
Machine Enrollment (on App)
: Download the SimplyFi App on your device. The Candy SimplyFi App
is available for devices running both Android and iOS, both for tablets and for smartphones. Get all
the details of the functions by browsing the App in DEMO mode.
Open the App, create the user profile and enroll the appliance following the instructions on the
device display or the "Quick Guide" attached on the machine. This operation is necessary just for
the first installation. To finalize the enrollment following the instruction on the smartphone’s
screen.
Refrigerator usage from remote by App
: When the enrollment is completed, there will be Wi-Fi LED
switched on. From now on it will be possible to manage the product by using the buttons on the
display or using the App: both of them will be aligned according to the last command given.
Summary of Contents for COMBI
Page 1: ...USER MANUAL COMBI ...
Page 563: ...563 ...
Page 564: ...CANDY HOOVER GROUP S R L Via Privata Eden Fumagalli 20861 Brugherio Milan Italy ...