74
This button allows to delay the start of the
programme from
30 minutes
(
1 hour
on
some models) to
24 hours
in
30 minutes
intervals (
1 hour
on some models).The
delay selected is shown on the display.
After pressing the
START/PAUSE
button
the time showed decrease minute after
minute.
It's possible transform a cycle from
automatic to programmed, up to
3
minutes
after the start of the cycle.
The progressive pressure increases the
time in
10 minute
intervals. After this
selection to reset the automatic drying
functioning is necessary to switch off the
dryer.
In case of incompatibility, all indicator
lights flash quickly for 3 times.
This button allows to set the desired
dryness level editable option up to
3
minutes
after the starting of the cycle:
Ready to Iron
: it leaves the garments
slightly wet to facilitate ironing.
Dry Hanger
: to get garment ready to
be hang.
Dry wardrobe
: for laundry that can be
directly stored.
Extra-dry
: to get completely dry
garments, ideal for full load.
This appliances is equipped with
Drying
Manager
function. On automatic cycles,
each level of intermediate drying, prior to
the reaching the selected one, is indicated
by flashing the light indicator corresponding
to the degree of drying reached.
In case of incompatibility, all indicator
lights flash quickly for 3 times.
It’s possible to switch an automatic
program to rapid program, up to
3
minutes
after the start of the cycle. The
progressive pressure increases the time
(
30-45-59 minutes
).
After this selection to reset the automatic
drying functioning it is necessary to
switch off the dryer.
In case of incompatibility, all indicator
lights flash quickly for 3 times.
During the cycle the option sets alternate
movements of the drum to reduce the
folds and automatically sets the drying
level to
"Ready to Iron"
. Moreover this
option activate an anti-creases movement
of the drum pre cycle in case of activation
of the delay and at the end of drying
cycle. It is activated every 10 minutes, up
to 6 hours after the end of the drying
cycle.
To stop the movements set the
programme selector to
OFF
. Useful when
it's not possible to remove immediately
the laundry.
Simultaneously pressing the
START/PAUSE
and
ANTI CREASE
buttons allows a
previously downloaded cycle to be started
whilst the
Smart Touch
position is selected
on the programme knob (for downloading
cycles from the App see the relevant
section of this user manual).
START SMART TOUCH
ANTI CREASE button
RAPIDS button
DRYING SELECTION button
TIME CYCLE SELECTION button
Opening of the porthole with delayed
start set, after re-closing the porthole,
press start again to resume the counting.
DELAY START button
Summary of Contents for CRE H10A2DE-S
